Professional solid wood worktop restoration in South Wales costs between £550 and £800 for a typical kitchen, depending on the size of your worktop area and the extent of damage. This compares to £3,000–5,000 or more for a full worktop replacement — a saving of up to 70–85%. This guide gives you a transparent breakdown of exactly how pricing works for worktop restoration in South Wales.
Quick answer: Most South Wales kitchens cost £550–800 to restore. Replacement costs £3,000–5,000+. Restoration saves you up to 85% while delivering a result that is often better than factory-new.
Worktop Restoration Pricing in South Wales: What to Expect
According to Ashley Coombes, founder of Coedwig Creations and a South Wales worktop restoration specialist, every quote is based on a combination of surface area, damage level, and the number of distinct worktop sections. Here is a general guide to what different kitchens typically cost to restore in 2026:
| Kitchen Size | Approximate Worktop Length | Typical Cost |
|---|---|---|
| Small (galley or terraced) | 2–3 linear metres | £550 |
| Medium (standard semi-detached) | 3–5 linear metres | £550 – £650 |
| Large (detached / open plan) | 5–8 linear metres | £650 – £800 |
| Very large / kitchen with island | 8+ linear metres | £800+ |
These are indicative ranges — every kitchen is different, and a free personalised quote is always the best way to get an accurate price for your specific worktops. To get a quote, WhatsApp photos of your worktops and your postcode to Ashley on 07873 536 738.
What Factors Affect the Cost of Worktop Restoration?
1. Total Surface Area
The most significant factor. A larger kitchen with more worktop runs will always cost more than a smaller galley kitchen. We measure by linear metres — the total combined length of all your worktop sections, measured at the front edge.
2. Extent and Depth of Damage
Surface scratches and a depleted oil finish are relatively quick to address. Deep scratches that require multiple sanding passes, severe burn marks, or significant water damage that has blackened the wood grain take longer and therefore cost slightly more. However, even heavily damaged worktops can almost always be fully restored — it just takes more time.
3. Number of Sections and Complexity
A kitchen with a separate island worktop, or an L-shaped layout with multiple corner pieces, requires more setup time and careful work around edges and joints. This is reflected in the price.
4. Wood Species
Some wood species are harder than others. Oak and walnut are relatively straightforward to work with. Iroko is extremely hard and requires more sanding time. Dense species like teak can also require additional passes. This is typically a small adjustment to the base price rather than a major factor.
5. Location Within South Wales
Being based in Llanharry in Rhondda Cynon Taf, we are centrally located within our South Wales service area. Travel time is factored into pricing for more distant locations, but we deliberately price to remain competitive across the whole of South Wales.
Restoration vs. Replacement: The Full Cost Comparison
To understand the true value of restoration, it helps to see the full cost of replacement. Here is a realistic comparison for a medium-sized South Wales kitchen:
| Cost Component | Restoration | Replacement |
|---|---|---|
| Labour | Included | £400 – £800 (fitting) |
| Materials | Included (Osmo oil) | £1,500 – £3,000 (solid wood) |
| Plumbing (disconnect/reconnect) | Not required | £150 – £300 |
| Disposal of old worktops | Not required | £100 – £200 |
| Risk of tile/splashback damage | Minimal | High (often £200-500 to repair) |
| Total | £550 – £650 | £2,350 – £4,800 |
On this basis, restoration saves the average South Wales homeowner between £1,900 and £4,200 on a medium kitchen. That is a significant sum — money that could be invested in other home improvements, or simply kept in your pocket.
What Does the Price Include?
Coedwig Creations quotes are inclusive of:
- Full assessment of your worktops before work begins
- Protective covering of adjacent surfaces and appliances
- Professional dust-free sanding (removing 99.9% of particles)
- Grain cleaning and any necessary damage-specific repair work
- Application of Osmo Polyx-Oil in appropriate coats for your wood species
- Full clean-up on completion
- Aftercare guide (including our online aftercare guide)
- Courtesy follow-up to ensure you are delighted with the result
How to Get a Quote
The fastest way to get an accurate, no-obligation quote for your South Wales home is to:
- Take a few clear photos of your worktops — include any areas with damage (scratches, burn marks, water staining)
- Note your postcode
- WhatsApp both to Ashley on 07873 536 738
Ashley will typically respond with a price within a few hours on weekdays. For most South Wales homes, a firm quote can be given from photos alone — there is no need for an initial site visit before booking.
Get a Free Quote Today
WhatsApp photos of your worktops and your postcode — typically responded to within hours.
WhatsApp Ashley — 07873 536 738Frequently Asked Questions About Worktop Restoration Costs
Is the quote I receive final, or are there hidden costs?
At Coedwig Creations, the price quoted is the price you pay. We do not add travel charges, material surcharges, or VAT on top. The quote you receive after sending photos is the complete price, barring any unexpected issues discovered on the day (which we would always discuss with you before proceeding).
Can you restore just part of my worktop, or does it need to be the whole run?
We can restore specific sections, but we always recommend doing a complete run at once where possible. Sanding and re-oiling just part of a continuous worktop section can result in a visible difference in sheen between the treated and untreated areas — especially on older worktops where the existing finish has aged. We will advise you on this when you send photos.
How does the cost compare to using a cheap DIY oil from a hardware store?
DIY oiling with a product like Danish oil from a hardware store costs perhaps £20–40 in materials but it won't address any existing damage, and it typically adds a coat of oil on top of a damaged finish rather than stripping back and starting fresh. The professional restoration process removes the old surface entirely through sanding, treats any damage, and builds a new finish from scratch using professional-grade materials. The results are incomparable — and professional restoration lasts 8–15 years before the next refresh is needed.
How often will I need to have my worktops professionally restored?
With a high-quality Osmo Polyx-Oil finish and proper maintenance (using the right cleaning products and periodically applying maintenance oil), a professional restoration should last 10–15 years before another full restoration is needed. Annual light oiling with Osmo Polyx-Oil Maintenance Oil extends this significantly. The aftercare guide on this website covers exactly how to look after your worktops between restorations.
Do you offer any payment options?
We accept cash and bank transfer on the day of the restoration. Please contact us to discuss payment arrangements if needed.